Gold Supplier >Shanghai Haohai Chemical Co., Ltd.
|
Product Name: Eco-Packing Foam Place of Origin: China Specifications: 1) Component: Polyol mixture 2) Color: transparent or light yellow 3) Density: 1,110kg/m3 4) Viscidity (25oC): 450+100mPa.S 5) Foam density: 10-36kg/m 6) Compressive strength: >10kpa 7) Recovery rate at 50% pressed: >95% 8) Temperature: 10-70oC The foam is packed in a galvanized drum with a net weight of 200kg. Chemicals should be stored at 15 – 30 oC, protected from sunlight and rain, and should be kept well sealed. The product has a storage life of 6 months. |
|
Product Name: Foam Gun Place of Origin: China It's used for gun type PU foam. It can be used repeatedly but must be cleaned by using PU cleaner after use. The foam discharge rate can be regulated with the trigger and controlled with the flow adjustment screw. Turn off the flow adjustment screw clockwise-direction when finishing. |
|
Product Name: Flange Place of Origin: China Plane flanges permit ducts to be joined with extremely low leakage. The panels are joined in their width sections through the "H"-type bayonet structure without using any gaskets. Generally they are made of PVC in 4 meter lengths. Ideal for the creation of take-offs and tap-ins and connection into the plenum chamber. Also available are "U"type, "F"type, "H"type, and "Y"type aluminum flanges. |
|
Product Name: Flange
Place of Origin: China Plane flanges permit ducts to be joined with extremely low leakage. The panels are joined in their width sections through the "H"-type bayonet structure without using any gaskets. Generally they are made of PVC in 4 meter lengths. Ideal for the creation of take-offs and tap-ins and connection into the plenum chamber. Also available are "U"type, "F"type, "H"type, and "Y"type aluminum flanges. |
|
Product Name: Pre-Insulated PIR Modified PU Duct Panel Place of Origin: China Easy to install, it has a high density, good insulation, low leakage of air (which saves energy), easy to clean, environmentally friendly, non-itchy, and Freon free. Features: 1) Specification: 4,000 x 1,200 x 20mm 2) 80/80um aluminum foil, both sides embossed 3) Density: 60kg/m3 4) Compressive strength: 200N/mm2 5) Thermal conductivity: 0.021 W/m.K 6) Flame retardancy: B1 7) Friction coefficient: 0.0135 |
|
Product Name: Pre-insulated PIR PU Duct Panel Place of Origin: China It's made of a layer of silicate modified fireproof rigid polyurethane, foam coated with aluminum foils, and is a new alternative to galvanized ducts. Easy to install, it has a high density, good insulation, low leakage of air (which saves energy), easy to clean, environmentally friendly, non-itchy, and Freon free. Features: 1) Specification: 4,000 x 1,200 x 20mm 2) 80/80um aluminum foil, both sides embossed 3) Density: 60kg/m3 4) Compressive strength: 200N/mm2 5) Thermal conductivity: 0.021 W/m.K 6) Flame retardancy: B1 7) Friction coefficient: 0.0135 |
|
It's made of a layer of silicate modified fireproof rigid polyurethane,
foam coated with aluminum foils, and is a new alternative to galvanized ducts. Easy to install, it has a high density, good insulation, low leakage of air (which saves energy), easy to clean, environment protective, non-itchy, and Freon free. Features: 1) Specification: 4,000 x 1,200 x 20mm 2) 80/80um aluminum foil, both sides embossed 3) Density: 50-60kg/m3 4) Compressive strength: 200N/mm2 5) Thermal conductivity: 0.021 W/m.K 6) Flame retardancy: B1 7) Friction coefficient: 0.0135 |
|
Product Name: Pu Foam ( Gun Type ) Place of Origin: China One component expanding PU Foam is a multi-purpose polyurethane foam that may be used for a wide range of building applications, such as filling gaps around pipes, draft proofing and sealing window and door frames, bonding wood and brick and sealing cracks and crevices. Adhesion is good to most construction surfaces, such as wood, brick, concrete, metals and many plastics. When cured it is weather and rot proof and can be trimmed, sawn, sanded and, if necessary, painted and plastered. PU foam will cure when moisture in the air reacts with the chemicals of the foam. All one-component foams meet GB8624-97 flame resistance requirements for caulks and sealants. We occupy 60-70% of the domestic market and are one of the largest suppliers in Asia. Guide for use: It can be applied to damp surfaces. OCF is moisture curing. The more moisture, the quicker the cure. It must be protected from Uvin external application to prevent discoloration and deterioration of the foam. Conventional paints can be applied to the foam. In overhead applications, foam must be retained in place to prevent its falling away until adhesion grips. It can be used in temperature range of 5-40oC, if in low temperature condition, we suggest that it should be placed in 25-30oC circumstance for 30 minutes to ensure the better performance. Uncured foam can be removed with solvent. But after cure, foam can only be removed mechanically (sanded or scraped off). Uncured foam sticks to hands and clothing. Specifications: 1) Storage life: 12 months when stored at 20o 2) 12 or 15 cans/carton 3) Density: 14 to 30kg/m3 4) Adhesive strength: PVC-PVC: 143kPa 5) Aluminum plates: 133kPa 6) Elongation at break: 8à20% 7) Shear strength: 22à50kPa 8) Compression strength 35à 100kPa at 10% compression 9) Water absorption: 0.03% volume 10) Thermo conductivity: 0.028-0.038W/(m.k) 11) Tack free time: 12mins at 23oC/50%RH 12) Yield per 100 ml: 5 - 6L 13) Closed cells: 60 - 70% 14) Storage life: 12 mouths when stored at 20oC 15) Closed cells: 60 - 70% |
| Company Name: | Shanghai Haohai Chemical Co., Ltd. |
|---|---|
| Contact Person: | n/a |
| Address: | 5/F,139-2 Anshun Road, Shanghai City. China |
| Zip: | n/a |
| Telephone: | n/a |
| Mobile Phone: | n/a |
| Fax: | n/a |
| Website: | n/a |
Home
Products
Selling Leads