|
Product Name: BSMJ Series Self-healing LV Shunt Capacitor Model Number: BSMJ Series Place of Origin: China Main technical parameters: 1) Usage environment: a) Surrounding temperature: -25 ~ 50°C b) Humidity: <85% c) Altitude: <2,000m 2) Rated voltage: 0.23 - 1.2kV, AC 3) Rated capacity: 1 - 60kVAr 4) Capacity deviation: 0 - +10% 5) Tangent of the dielectric loss angle: <0.2% (rated voltage, 20°C) 6) Withstand voltage between the poles: 5s if the voltage between the poles is 2.15V 7) Maximum permitted over-voltage: 1.10V over rated voltage 8) Permitted over-current: 1.30A (as the rated current) 9) Automatic discharge: less than 50V in 3min after power broke down 10) Conforms to the standards of GB12747-1991 and IEC60831-1996 |
|
All of its performance indexes reach the requirements of IEC252 criterion. With its good self-healing ability, long life-span and high proportionality, it is widely used as the start-up and running capacitor, especially for electric appliances, such as electric fans, ventilators and exhaust fans.
Technical features: 1) Climate type: 40/70/21 2) Capacity volume variance: &Plusmn;5%, &Plusmn;10% 3) Testing voltage: between leading-out 1.75UR, 10S no breakdown 4) Between leading-out end and shell: 2,000V AC, 10S no breakdown 5) Insulation resistance: between leading-out ends: ≥3,000Mn.UF 6) Between leading-out end and shell: ≥1,000Mn 7) Loss tangent: ≤0.002 (50Hz) 8) Specifications: can be supplied according to customers' special needs Outer packing: Standard export carton |
|
Product Name: Aluminum Sheets for Capacitors Model Number: RUIMIN-DR Place of Origin: China Features: 1) Alloy: 1100 / O 2) Thickness: 0.2 - 0.35mm 3) Width: 160 - 700mm 4) Suitable for capacitors Packing: Standard export packing |
|
Features:
1) Environment temperature: -25~+85oC 2) Specified voltage: 250V/400V/450V/630V |
|
Features:
1) Metallic enclosure painted with epossidic dust paint, color RAL7032 2) Load-break switch with door interlock 3) Single phase self-healing polypropylene capacitors 4) Signal lamp power on all components inside these products are compliant with safely regulations Technical characteristics: 1) Rate voltage: Ue = 400V 2) Rate frequency: 50Hz 3) Max current overload: 1.3In 4) Max voltage overload: 1.1Vn 5) Insulating voltage: 690V 6) Temperature range: -5 ~ +40°C 7) Discharge device: on each bank 8) Use: indoor 9) Service: continuous 10) Capacitors connection: delta 11) Total joule losses: -2W/kVAr 12) Inner surface finish: zinc passivation 13) Applicable standards: EN60439-1/2 14) Capacitors standards: EN60831-1/2 |
|
Available capacitors:
1) Motor start 110/125V AC 2) Motor start 220/250V AC 3) Motor start 330V AC 4) Motor run 370V AC 5) Motor run 440V AC 6) Relay and hard start Specifications: 1) For use with all PSC A/C units 4,000 - 120,000 BTU (T/2 - H.P.) 2) Can be used on 120-288V AC units 3) Various capacitance available |
|
Features:
1) Motor starting capacitor 2) Metallized pulse capacitor 3) Microwave oven capacitor 4) Motor running capacitor |
|
Features:
1) CD11 Series Series Aluminum Electrolytic Capacitor: a) Operating temp. range: -40~+85ºC b) Rated voltage range: 10V~160V; c) Nominal cap.range: 0.1μF~22000μF; d) Leakage current:I<=0.02CV e) Standard case size,general characteristics parameter,used in electronic circuits of black and white TV ,radio recordes and instruments; 2) CD13N Series Aluminum Electrolytic Capacitor: a) Operating temp. range; b) Rated voltage range: 160V~250V @-40~25+85ºC; c) 350~450V@-25~+85ºC d) Nominal cap.range:220μF~18000μF; e) Leakage current:I<=0.02CrUr f) Mesium and hgh voltage,large capacitance,screw,high ripple current, Used in storing energy of electric welder and UPS,air conditioners etc. 3) OEM acceptance |
|
Specifications:
1) Compatible brands: muRata, TDK, AVX, Kement, Philips, WVSN, Darfon, Teamyoung, SC, ROHM, Panasonic, Samsung 2) Series: 0201, 1005, 1608, 2012, 3216, 3225, 4516, 4532, 1825, 2220, 2225 3) Capacitance: 0.2P~100uF 10V~5,000V 4) Warp: B=+-0.1pF, C=+-0.25pF, D=+-2%, J=+-5%, K=+-10%, M=+-20%, Z=-20% to +80% |
