|
Product Name: Fuel Hose Model Number: HL010 Place of Origin: China Features: 1) Products available: vehicle-used cloth-clapped rubber hose, inter-cooling silicon rubber hose, fuel hose, high-pressure hose, free bending hose, conduct hose and various rubber tape, brake hoses and assemblies, air conditioner hoses and assemblies, oil seals, and "O" rings 2) Cover materials: NBR, HNBR, EP/EPDM, SBR, CR, CM, EA, CSM, ECO, NR/IR, VMQ, PMQ, PVMQ, silicone, nitrile, and polychloroprene |
|
Product Name: Hydraulic Rubber Hoses Place of Origin: China Made of excellent oil-resistant and anti-aging rubber, these hoses are reinforced with braided copper facing wire. With working temperatures between -40 and 93oC, these hoses conform with American SAE J517 100R1 and 100R2 standards, and have smooth surfaces. |
|
Features:
1) Material: aluminum alloy 2) Sell to Europe and America 3) Used for Pasat, Audi, Santana, VW |
|
Product Name: Auto Parts Place of Origin: China We can supply a variety of auto parts. |
|
Product Name: Car Air Conditioning Hoses Place of Origin: China We can supply car air conditioning hoses. |
|
Specifications:
1) User: turbine superchargers and coolants 2) Material: silicone 3) Operating temperature: -50°C ~ 200°C 4) Pressure: 0.5 - 0.8MPa 5) Size tolerance: ±0.5mm |
|
Features:
1) Two different producing methods according to customers' requirements 2) Filament winding 3) Roll-wrapping 4) Suitable for: tents, kites, windmills, sails, toys, curtains, model, planes, musical instrument, handicrafts, handbags, golf cues, jewelry, umbrellas, other sports apparatuses |
|
Product Name: High Pressure Oil Tube for Diesel Place of Origin: China Features: 1) Executive standard: GB3093 2) Specification range: OD: 6-10mm, ID: 1.0-4.0mm 3) Steel kind / steel grade: 20A, 20, st35, st45 |
|
Features:
1) Special pressure balance by pass prevent lube oil into inside 2) Efficiency much better 3) Patented infiltrated ceramic piston ring without gap at joint prolongs the service life 4) Unitary body cast by aluminum alloy with optimum heat transfer Specifications: 1) Number of cylinders: 4, 4 2) Swept volume: 555, 650cm3 3) Theoretical displacement: 1,450rpm/h 4) Lubrication: 48.3, 56.6 5) Forced feed lubrication: zahnrad pumpe /gear pump 6) Oil charge: 2.0, 2.0L 7) Weight: 32, 31kg 8) Operative range: a) Max. speed, n design 1/min: 3,000, 3,000 b) Max. Speed, k design 1/min: 3,500, 3,500 c) Min. speed 1/min: 500, 500 d) Max. admissible aperating overpressure: 25HP, 25 Bar e) Max. admissible operating overpressure: 19LP, 19Bar f) Max. admissible discharge end temperature: 140oC |