|
Product instructionWaste paper is used as the raw material for producing pulp moulding
protective packaging products. The raw material is defibrated in hydrapulper to certain consistency with some additives. The stock is absorbed and vacuumed to wet flans, on the special metal mould and then the wet flans are dried and pressed with heat to finished products. The pulp's inherent properties and the well-designed geometric structure make the PMP with very good protective properties, such as shockproof ability, static free and antisepticise. Through many practical appliances and testing, it is indicated PMP can totally replace EPS, PS, PVC for industry products protective packaging. PMP is widely used in the field of electronic products, electrical equipment, communication apparatus, computer parts, glass products, ceramic products, droplights, artworks, cosmetics, health care products, wine bottles, fruit, eggs and more than ten kinds of one-off dishware as cups, bows, plates and so on. |
|
Product Name: Horizontal Automatic Slitting Machine Model Number: WFQ Place of Origin: China This machine uses microcomputer control to automatically complete slitting and rewinding. With stable operational performance, this model is widely used for converting such base materials as roll film, aluminum foil, insulating paper and roll paper, and is a main piece of auxiliary equipment for packaging lines. Specifications: 1) Max. width of main roll: a) WFQ-700: 600mm b) WFQ-1100: 1000mm c) WFQ-1300: 1200mm 2) Max. diameter of main roll: Φ600mm 3) Width of final roll: a) WFQ-700: 30 - 600mm b) WFQ-1100: 30 - 1000mm c) WFQ-1300: 30 - 1200mm 4) Slitting and rewinding speed: 5 - 180m/min 5) Total power: a) WFQ-700: 2.7kW b) WFQ-1100: 3.5kW c) WFQ-1300: 3.5kW 6) Machine weight: a) WFQ-700: 1800kg b) WFQ-1100: 2000kg c) WFQ-1300: 2200kg 7) Overall dimensions: a) WFQ-700: 2100 x 1745 x 1150mm b) WFQ-1100: 2100 x 2045 x 1150mm c) WFQ-1300: 2245 x 2100 x 1150mm Performance and features: 1) Automatically rectifies the unevenness of the end face of film or paper with pattern deviations 2) Uses as imported photoelectric switch and, PC deviation-rectifying control system 3) Automatic meter counting and stopping at settable counting meter number 4) Round knife device can separate and cut paper rolls of 350k/m2 or below 5) Double air inflatable rolling shaft enables easier and faster loading and unloading of paper cores 6) Automatic blowing rim charge conveying device |
|
Features:
1) Automatically run 2) High speed with stable quality products 3) Safe operation and free maintenance 4) Multi power supply system for many chooses 5) OEM is welcomed |
|
Applications:
The equipment mainly produces top-grade napkins, clear model-embossing and clear model-printing. It applies the advanced frequency conversion timing system, automatic strain-controlling system, automatically correct-deflection controlling system and a folding machine, which has the pushing and holding functions. Specifications: 1) 13-16gsm double layers tissue 2) Size of raw tissue: 1,400 x 230mm (330mm) (diameter x width) 3) Core diameter: 76mm 4) Product size: (230 x 230) ± 2mm, (330 x 330) ± 2mm 5) Folded size: (115 x 115) ± 2mm, 1/4 fold; (165 x 165) ± 2mm, 1/4 fold; (57.5 x 115) ± 2mm, 1/8 fold; (82.5 x 165) ± 2mm, 1/8 fold 6) Speed: 400-500pcs/min (if printing, the speed is 30% lower) |
|
Product Name: Tissue / Napkin Making Machine Model Number: production line Place of Origin: China Modern life increases people's living standards and sanitary life help people with more confirtable conditions. Napkin / tissue / handchieves making machines easy your living. Packing: Wooden package |
|
ZDS series MC pulper is a key equipment in deinking process. At consistency
10 - 15% and under the effect of chemical and physical action, the waste paper, such as newspaper, magazine paper, which is film-coated is disintegrated into fiber stock, and efficiently separate light impurities, including ink particles and plastic films from fiber. Design features: ZDS series MC pulper consists of a steel vat, vertical helical rotor, drive mechanism, discharging device. The rotor is a 3-thread helical rotor with varied pitch and varied diameter when the rotor rotating. The stock at consistency 10 - 15% is drawn by the helical rotor and flung out of center. As a result, waste paper stock is fiberized under intensive internal friction and kneading effect on fiber stock, in addition to friction by rotor vanes with teen. Meanwhile, ink particles is separated from fiber by chemical and physical action. Features: 1) Waste paper stock at consistency 10 - 15% and saves energy 20 - 30% compared to a low consistency pulper 2) The contaminants in waste paper stock are easily detached from fiber without being smashed into small piece and hence give a good condition to down stream cleaning process 3) For processing wet-strength paper, low Ph and high temperature is required, so comparing to low consistency pulping, it can save heat and electric energy and chemical by 50% respectively 4) It's compact in structure, safe and reliable for operation |
|
Features:
1) Our felt can have a speed of less than 1,000m/min paper machine and produce paper measuring from 8g/m2. It has more than 60 types in BOB series, BOM series and special felt series 2) BOM series: a) Initial good suitableness b) Favorable for increasing speed of paper machine c) Obtains good state for a long time d) Long life e) Good filterability and bigger felt hole, easy washing, not easily plugged by other matters, good for vertical dewatering of press type; good elasticity, inter base mesh can resist high pressure, can efficiently reduce water of wet paper and broken end so as to increase speed of machine, good tension strength, not easily broken by high pulling force and high load, not easily folded f) Smooth and thick, good improving paper surface quality g) Reduces or removes felt mark 3) BOM series: BOM forming felt, dressing press felt, press felts, multi-press felt, big-roll press felt, dryer felt, etc. |
|
Used to divide and cut rolls of paper, non-woven fabrics and film into bars, and then roll them into coils, especially used to cut materials of high tensility.
Features: 1) Easy to adjust the cutting width 2) Slitting roll release is controlled by magnetism powder brake, and the release tension is controlled automatically 3) High release accuracy because of optical-electrical hydraulic correction system 4) The handwheel regulates and rectifies the deviation device 5) Can stop automatically with figure displaying meter and yard machine 6) Transmitted by electric machines with decreasing and different speeds 7) The process of rewinding: a) Winding-off: by key-type of air shaft b) Winding: by leaf-type of air shaft Main Technical Parameters: 1) Max. width of slitting tape: 900mm 1,300mm 1,600mm 1,900mm 2) Min. width of slitting tape: 8mm 20mm 3) Max.slitting diameter: Φ600mm Φ800mm 4) Rewinding diameter: Φ400mm Φ600mm 5) Machine speed: 5~80m/min 6) Power supply: 2kw 3kw 3.5kw 7) Dimensions (Lx Wx H): 200x190x150cm 240x190x150cm 270x200x160cm 300x200x160cm |
| This widely product is used in the textiles, printing and paper pulp workshops in addition to the pharmaceuticals industry and the bioengineering industry. |
|
Specifications:
1) Automatic computer contrl 2) Production capacity: 200 wraps/min 3) Raw paper specification: 420mm (W) x 3 layers 4) Handkerchief wrap specification (L x W x T): 73 - 105 x 53 - 55 x 18 - 25mm 5) Air consumption: more than 8cbm/h 6) Working pressure: more than 0.6MPa 7) Main power: from 342V - 418V AC, 49Hz - 51Hz 8) Dominate power: 24V DC 9) Rated power: 35kW 10) Outside dimensions(L x W x H) : 5,340 x 4,200 x 1,730 mm 11) Net weight: 7,500kg |