|
Product Name: Doped Aluminum Coil
Place of Origin: china Doped aluminum coil is made from aluminum foil and plate through chemical cleanout,then coloured with polyester and fluorocarbon coating,and dried by high temperature.It is suitable to be the surface of aluminum&plastic compound panel and decorative material of inside&outside material. Our company introduces the most advanced product line of China.The set of equipment adopts complete automatically controlling.German Henkell degrease technique and PLCfrequency conversion controlling self-regulation technique. so it has high speed efficiency and even paint. We can produce special specification products according to the need of clients. |
|
Features (dispersant agent):
1) Made of two kinds of 19# and 81# glass 2) Grades: all grades available 3) Product category: a) 1 - 1.5 / 1.5 - 2 / 2 - 2.5 / 2.5 - 3 / 3 - 4 / 0.8 - 1mm b) 20 - 30 / 30 - 40 / 40 - 60 / 60 - 80 mesh 4) Mechanical properties: a) Pressure resistance strength: 2,100kg/cm2 b) Micro hardness: 5,000kg/cm c) Specific gravity: 2.5 d) Expansion coefficient: 86 x 10 / 7 5) Applications: dispersant agent for paint, dye, paper, oil and ink 6) Acid resistance: a) Loses 0.0095mg/cm2 weight when steeped in 20% HCL solution for 4 hours b) Loses 0.0095mg/cm2 weight when steeped in 20% H2SO4 solution for 4 hours 7) Alkali resistance: loses 0.42mg/cm2 weight when steeped in 1% NaOH solution for 4 hours Packing: 25kg/bag, 1,000kg/jumbo bag Features (road marking glass beads): 1) Can improve visibility of traffic markings and road signs in order to provide safer night driving conditions 2) Grades: class A, class B, highly refractive glass beads 3) Class A: a) Mixed with paint prior to stripping the road b) As the paint layers wear, the beads are exposed, giving enhanced visibility to road markings c) Distribution: sieve d) Size: 1,180 / 850 / 425 / <425um e) Retention: 0 - 3 / 5 - 20 / 65 - 95 / 0 - 10% f) Roundness: >70% 4) Class B: a) Dropped on freshly stripped painted surfaces on the road to provide immediate enhanced visibility to night drivers b) Distribution: dropped on c) Size: 850 / 600 / 300 / 180 / <180um d) Retention: 0 - 5 / 5 - 20 / 30 - 75 / 10 - 30 / 0 - 15% e) Roundness: >80% 5) Chemical and physical properties: a) Basic material: 62% SiO2 b) Shape: spherical c) Color: white d) Specific gravity: 2.4 - 2.6g/cm3 e) Hardness: 5.5 - 6.0Moh f) Refractive index: 1.5 - 1.6 6) Various sizes available Packing: 25kg, 50kg/bag (or packed at customer's request) Features (high refractive index glass beads): 1) Shape: spherical 2) Color: white 3) Specify gravity: 4.1±0.1g/cm3 4) Opacity: 5.0% 5) Roundness: 95% (min.) 6) Refractive index: 1.9-1.93 7) Size: 20 - 30 / 25 - 37 / 35 - 45 / 45 - 55 / 53 - 65 / 60 - 75 / 75 - 90 / 90-150um 8) Various other sizes available Packing: 25kg/iron drum |
|
ZB610 is a modified styrene butadiene dispersion designed specifically for use in formulating polymer modified mortars and cements. It is compatible with the full range of cements normally used in the construction industry.
Features: 1) The incorporation of ZB610 into cementitious products results in increased flexural and tensile strength, which can allow a reduction in the bulk of the structure 2) Polymer modified cements and mortars offer improved protection for the reinforcing rods against carbonation which in turn helps prevent "spalling" 3) The repair of spalling damage is one of the major uses of ZB610 as the polymer modification, which offers greatly improved adhesion of the new cement to the old as well as improved anti-carbonation protection 4) Another major application for ZB610 is in the production of cementitious ceramic tile adhesives The polymer-modified adhesives are widely used as they allow the use of the thin bed method of laying ceramic tiles Technical data: 1) Solids content: 46.0 - 48.0% 2) pH: 9.0 - 10.0 3) Viscosity: 10 - 100mpas 4) Glass transition temperature: 11°C 5) Storage temperature: 10-30°C, for 6 months at cool and ventilated places |
|
We have:
1) PK-1 lacquer coating rooms 2) PK-2 lacquer coating rooms 3) PK-3 lacquer coating rooms |
|
Product Name: Titanium Dioxide Model Number: HF-300 Place of Origin: China Specifications: 1) TiO2 content % (m/m): 98.5 min 2) Sulfur content %:0.06 max. 3) Fe2O3 content %: 0.050 max. 4) 45um mesh residue % (m/m): 0.50 max. Packing: 25kg/plastic film lined plastic woven bag |
| We can supply a wide variety of chemicals, such as sodium hyaluronate and neopentyl glycol. |
|
Product Name: Water-Based Coating Place of Origin: China After being dried, there is no crack and crisps on the coating surface. The coating surface is smooth and has high strength at normal and high temperature. As a result, the sand adherence on castings can be prevented and smooth casting surface can be obtained. It should be noted that paste coating has low moisture content, easy transport storage and low cost. It should be diluted to slurry before applying. It is suitable for various molds and cores, including sodium silicate sand, oil sand, resin sand and synthetic fat oil. Mechanic stirring is necessary before using. The recommended rotate speed is ≥500rpm, and stirring time should be more than 15 minutes. Manual stirring is an alterative. The coatings should be stored at cool place. Frozen is prohibited. Overdue coatings can be used if it does not ferment, turn odor or produce bubble. In case the package for SG-610A paste coating is broken and the coating gets hard, it can not be used anymore. Instructions: 1) SY-110 coating: a) Used for spraying b) Add water (5 - 10% of coating) to dilute the coating and stir the mixture well c) Dipping is not allowed d) Coating surface area: 0.75 - 0.8m2/kg e) Coating thickness: 0.3 - 0.35mm 2) SY-610 coating: a) Add 3 - 5% water to dilute before use b) Stir the mixture well c) Baume should be within 48 - 54 Be' 3) SG-610A paste coating: a) Make the paste even with little water b) Then add more water to make the mixture with defined Baume concentration c) Do not over dilute the coating to avoid the reduction of suspension ability of coating d) Suitable Baume concentration should be within 48 - 60 Be' 4) SY-810 coating a) Generally no need to dilute it b) If there is a need, the amount of water to be used should be less than 5% of coating c) Can be used for brushing and spraying 5) SY-910 coating: a) Generally no need to dilute it b) If there is a need, the amount of water to be used should be less than 5% of coating c) Can be used for brushing and spraying Packing: SY-110: 50kg/plastic drum SY-610: 30kg/plastic drum SY-800, 900: 25kg/plastic drum SG-610A: 25kg/woven bag |
|
Thermosetting powder coatings is our prevailing product, including
pure epoxy powder coating, epoxy/polyester powder coating and pure polyester powder coating together with decorating powder coating such as appearance of sand ripple, orange ripple, furrow ripple, sinker ripple, tortoise ripple, net ripple, flashing ripple, and jacquard ripple. Packing: 20kg/ctn |
|
Product Name: Backlit Flex Model Number: FUNSUN BACKLIT FLEX Place of Origin: China Features: 1) Models: B120/B130/B150/B170 2) GSM: 390/440/510/580 3) Thickness: 0.36, 0.40, 0.48, 0.52mm 4) Details: extra gloss, 200D x 500D / 18 x 12, bluish white, face and backing, high light passing 5) Size: 02-3.2m Packing: 50, 70, 100m/roll, winded on 3" paper core with core plugs at both ends, wrapped with OPP film and 2mm bubble foam and finally wrapped with HDPE woven sack Notes: 1) We are manufacturing much more items 2) The information of physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guaranty and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents average and is not intended for use as a specification.) |
|
Product Name: Coatings Model Number: Coat02 Place of Origin: China Features: We are a high tech enterprise specialized in the research, development and production of full ranges of coatings including auto paints, motorcycle and bicycle paints, furniture paints, water paints, architectural decoration, equipment paints, thermoses and thermoplastic powder coating. With the equipment imported from Germany, we will always adhere to high quality and pursue excellent service. We would like to start and develop business cooperation and exchange with the enterprises from all over the world in the fields of vehicle painting, chemical painting, metal packaging, hardware, art ware and fitment engineering. Products available: 1) Auto, motorcycle and bicycle paints: a) S87-1 acrylic acid polyurethane cover gleam varnish b) BA87-3 acrylic acid polyurethane primer surfaces c) BA87-2 acrylic acid polyurethane paint d) CA87-2 alkyd amino paint e) CA87-1 alkyd amino over-coating varnish f) ZA87-2 polyester amino over-coating paint 2) Powder coating for thermoses and thermoplastic: a) Epoxy type powder coatings b) Mixed type powder coatings c) Polyester type powder coatings d) Polyaminoester type powder coatings e) Polyethylene type powder coatings 3) Architecture paints: a) 11 indoor paints b) 20 outdoor paints 4) Wood paint: a) 6 decoration paints b) 22 furniture paints 5) 3 UV paints |