Gold Supplier >Shanghai Haohai Chemical Co., Ltd.
This special panel adhesive is fireproof. The package is 12kg/tin (600g/bottle) and is used especially for adhering flange. |
It's used for gun type PU foam. It can be used repeatedly but must be cleaned by using PU cleaner after use. The foam discharge rate can be regulated with the trigger and controlled with the flow adjustment screw. Turn off the flow adjustment screw clockwise-direction when finishing. |
This foam cleaner is used to clean guns, remove foam canisters, and insert spray stems into cleaner canisters, in order to be able to manually clean any excess material from valve connections Open trigger valve on gun and discharge cleaner through gun until all traces of foam have been removed. Protect pressurized container from the sunlight and do not expose to temperatures above 50 degrees Celsius. Keep away from ignitable sources. Keep out of reach of children. |
One component expanding PU Foam is a multi-purpose polyurethane foam that may be used for a wide range of building applications, such as filling gaps around pipes, draft proofing and sealing window and door frames, bonding wood and brick and sealing cracks and crevices. Adhesion is good to most construction surfaces, such as wood, brick, concrete, metals and many plastics. When cured it is weather and rot proof and can be trimmed, sawn, sanded and, if necessary, painted and plastered. PU foam will cure when moisture in the air reacts with the chemicals of the foam. All one-component foams meet GB8624-97 flame resistance requirements for caulks and sealants. We occupy 60-70% of the domestic market and are one of the largest suppliers in Asia. Guide for use: It can be applied to damp surfaces. OCF is moisture curing. The more moisture, the quicker the cure. It must be protected from Uvin external application to prevent discoloration and deterioration of the foam. Conventional paints can be applied to the foam. In overhead applications, foam must be retained in place to prevent its falling away until adhesion grips. It can be used in temperature range of 5-40oC, if in low temperature condition, we suggest that it should be placed in 25-30oC circumstance for 30 minutes to ensure the better performance. Uncured foam can be removed with solvent. But after cure, foam can only be removed mechanically (sanded or scraped off). Uncured foam sticks to hands and clothing. Specifications: 1) Storage life: 12 months when stored at 20o 2) 12 or 15 cans/carton 3) Density: 14 to 30kg/m3 4) Adhesive strength: PVC-PVC: 143kPa 5) Aluminum plates: 133kPa 6) Elongation at break: 8à20% 7) Shear strength: 22à50kPa 8) Compression strength 35à 100kPa at 10% compression 9) Water absorption:0.03% volume 10) Thermo conductivity: 0.028-0.038W/(m.k) 11) Tack free time: 12mins at 23oC/50%RH 12) Yield per 100 ml: 3.25L 13) Closed cells: 60-70% 14) Storage life: 12 mouths when stored at 20oC 15) Yield per 100 ml: 3.25 litres 16) Closed cells: 60-70% |
One component expanding PU Foam is a multi-purpose polyurethane foam that may be used for a wide range of building applications, such as filling gaps around pipes, draft proofing and sealing window and door frames, bonding wood and brick and sealing cracks and crevices. Adhesion is good to most construction surfaces, such as wood, brick, concrete, metals and many plastics. When cured it is weather and rot proof and can be trimmed, sawn, sanded and, if necessary, painted and plastered. PU foam will cure when moisture in the air reacts with the chemicals of the foam. All one-component foams meet GB8624-97 flame resistance requirements for caulks and sealants. We occupy 60-70% of the domestic market and are one of the largest suppliers in Asia. Guide for use: It can be applied to damp surfaces. OCF is moisture curing. The more moisture, the quicker the cure. It must be protected from Uvin external application to prevent discoloration and deterioration of the foam. Conventional paints can be applied to the foam. In overhead applications, foam must be retained in place to prevent its falling away until adhesion grips. It can be used in temperature range of 5-40oC, if in low temperature condition, we suggest that it should be placed in 25-30oC circumstance for 30 minutes to ensure the better performance. Uncured foam can be removed with solvent. But after cure, foam can only be removed mechanically (sanded or scraped off). Uncured foam sticks to hands and clothing. Specifications: 1) Storage life: 12 months when stored at 20o 2) 12 or 15 cans/carton 3) Density: 14 to 30kg/m3 4) Adhesive strength: PVC-PVC: 143kPa 5) Aluminum plates: 133kPa 6) Elongation at break: 8à20% 7) Shear strength: 22à50kPa 8) Compression strength 35à 100kPa at 10% compression 9) Water absorption: 0.03% volume 10) Thermo conductivity: 0.028-0.038W/(m.k) 11) Tack free time: 12mins at 23oC/50%RH 12) Yield per 100 ml: 5 - 6L 13) Closed cells: 60 - 70% 14) Storage life: 12 mouths when stored at 20oC 15) Closed cells: 60 - 70% |
One component expanding PU Foam is a multi-purpose polyurethane foam that may be used for a wide range of building applications, such as filling gaps around pipes, draft proofing and sealing window and door frames, bonding wood and brick an sealing cracks and crevices. Adhesion is good to most construction surfaces, such as wood, brick, concrete, metals and many plastics. When cured it is weather and rot proof and can be trimmed, sawn, sanded and, if necessary, painted and plastered. PU foam will cure when moisture in the air reacts with the chemicals of the foam. All one-component foams meet GB8624-97 flame resistance requirements for caulks and sealants. We occupy 60-70% of the domestic market and are one of the largest suppliers in Asia. Guide for use: It can be applied to damp surfaces. OCF is moisture curing. The more moisture, the quicker the cure. It must be protected from Uvin external application to prevent discoloration and deterioration of the foam. Conventional paints can be applied to the foam. In overhead applications, foam must be retained in place to prevent its falling away until adhesion grips. It can be used in temperature range of 5-40oC, if in low temperature condition, we suggest that it should be placed in 25-30oC circumstance for 30 minutes to ensure the better performance. Uncured foam can be removed with solvent. But after cure, foam can only be removed mechanically (sanded or scraped off). Uncured ] foam sticks to hands and clothing. Specifications: 1) Storage life: 12 months when stored at 20o 2) 12 or 15 cans/carton 3) Density: 14 to 30kg/m3 4) Adhesive strength: PVC-PVC: 143kPa 5) Aluminum plates: 133kPa 6) Elongation at break: 8à20% 7) Shear strength: 22à50kPa 8) Compression strength 35à 100kPa at 10% compression 9) Water absorption:0.03% volume 10) Thermo conductivity: 0.028 - 0.038W/(m.k) 11) Tack free time: 12mins at 23oC/50%RH 12) Yield per 100 ml: 3.25L 13) Closed cells: 60 - 70% 14) Storage life: 12 mouths when stored at 20oC 15) Yield per 100 ml: 3.25 litres 16) Closed cells: 60 - 70% |
| Company Name: | Shanghai Haohai Chemical Co., Ltd. |
|---|---|
| Contact Person: | n/a |
| Address: | 5/F,139-2 Anshun Road, Shanghai City. China |
| Zip: | n/a |
| Telephone: | n/a |
| Mobile Phone: | n/a |
| Fax: | n/a |
| Website: | n/a |
Home
Products
Selling Leads