Degaussing circuits equipped with our PTC thermistors ensure perfect 

picture quality for large screen TVs and PC monitors.

Our time delay thermistors can replace traditional ballasts. 

Lamps that no longer work with traditional ballasts because 

of the higher voltage without pre-heating, turns them black. 

Using PTC, can increase the lamp's life up to four times.

LKM4140 consists of four identical over-voltage protection devices, 

with a double protection function. When there is an overload, 

the 5.6V stabilizing diode is destroyed reversing the short circuit 

to ground without a signal in order to protect the load. 

So at the same time of the PTC current increase, the PTC is still 

functioning. The input current decreases as an open circuit.

Without protection, abnormal current loads will destroy 

transformers or switching power sources. This device can be 

directly installed for overheating protection without changing the 

circuit.

Thermistors for limited current are fuses that can be used ten 

thousand times. This series can replace traditional fuses that cannot 

recover by themselves and replace expensive temperature switching.



Circuit protection for motor starters, transformers, chargers, 

low-voltage source, fluorescent lamps, multi-meters, transistors, 

computers, auto-lathes, telephone exchangers, AV equipment, 

and camcorders.

Specifications:

1) Base material: isinglass

2) Rated voltage: 4 – 240V

3) Power density: 0.01 – 0.5W/cm2

4) Surface temperature: 30 – 450oC

5) Max. insulation voltage: 3,750V/2mA

6) Widely used for warm fans, vacuum barrels, electric fans, 

   and electric foot warmers

Specifications:

1) Base material: glass

2) Rated voltage: 110 – 240V

3) Power density: 0.05 – 10W/cm2

4) Max. insulation voltage: 5,000V/2mA

5) Operating life: 20,000 times

6) Widely used in water heaters, steam combs and warm water devices

Specifications:

1) Automatic temperature control

2) Secure and stable, without burnout

3) Conserves energy

4) Simple construction

5) Wide voltage

6) Operating life: up to 5,000 hours

7) Customized orders as per clients' specifications available

Specifications:
1) Stable performance and long life; up to 10,000 hours
2) High efficiency and energy saving: saves up to 30%
3) Infrared radiation: 2.5 – 13.5#&956;m
4) Rated voltage: 6 – 240V
5) Applications: can be sintered on the surface of various materials 
   including vitreous, ceramic, glass, mica, and polymers

Specifications:

1) Voltage: 24 – 240V

2) Power: 100 – 3,500W

3) Materials: PTC and fan aluminum

4) Automatic temperature-control, electric-saving heater

4) Applications: air conditioners, dehumidifiers, dish dryers, 

   clothes dryers, portable heaters, car heaters

5) Operating life: 10,000 hours without burnout

PTC auxiliary air conditioner heaters developed by us meet 

international standards. The PTC auxiliary air conditioner heaters 

are widely used in air conditioners, air curtains, and humidifiers.

Specifications:

1) Quick starting

2) Easy to operate

3) Automatic temperature control

4) Customized orders as per client's specifications available

Specifications:

1) Automatic temperature control

2) Safe and secure

3) Rated voltage: 110 – 240V

4) Surface temperature: 50 – 280oC

5) Applications: steam combs, vacuum flasks/dishes, hair curlers

6) Customized orders as per client's specifications available

Specifications:

1) Safe and secure

2) Automatic temperature control

3) Suitable for surface temperatures below 260oC

4) Rated voltage: 80 – 240V

5) Power: 300 –1,000W

6) Max. insulation voltage: 1,500V/4s

7) Customized orders as per client's specifications available

Specifications:

1) Power: 100 – 3,500W

2) Input current: 2 –30A

3) Rated voltage: 24 – 240V

4) Applications: air conditioners, dehumidifiers, dish dryers, 

   clothes dryers, portable heaters, car heaters

5) Operating life: up to 1,000 times

6) Customized orders as per client's specifications available

Specifications:
1) No burnout or short circuiting
2) Heat-balance time: up to 10 minutes
3) Operating life: below to 5,000 hours
4) Customized orders as per client's specifications available

Specifications:

1) Base material: polymer

2) Rated voltage: 3 – 240V

3) Power density: 0.09 – 2.5W/cm2

4) Surface temperature: 30 – 80oC

5) Max. insulation voltage: 3,750V/5mA

6) Operating life: 50,000 times

7) Widely used for glove warmers and insole heaters