Features: 

1) Adopts no-base installation, omits traditional tripod type hanging structure 

    and simplifies the installation process

2) The basic platform is the work operation platform

3) The operation and the maintenance is simple and convenient

4) The rotary drum, the case and the basic plate of the equipment are 

    polished

5) All of the fasteners are made of stainless steel

6) The transmission section is sealed with stainless steel

7) The airtight packing is made of silicone rubber and equipped with washing 

    and spraying system

8) The whole machine meets GMP hygienic demand

9) Adopts imported PLC programmable control and frequency driving

10) Can set program according to demands

11) The feeding, separating, washing, dewatering, unloading and other 

    processes are automatically finished by the hydraulic and air-operation 

    electric control

12) Can carry out distance or close operation and can join PC network

13) The imported high-viscosity liquid damping agent type shock isolator which 

    joints the plate makes the energy produced by the shocking of the 

    centrifugal machine absorbed by the shock isolator

14) There is no shocking influence on the base ground and the neighboring 

    equipment

15) The outer case adopts whole-opening cover, convenient unloading 

16) Adopts opening-cover protection, overheat, overloading and over current 

    protection of the motor, overloading and over current of the frequency 

    converter, whole-process monitor of feeding, filtering, washing and 

    unloading

17) Full-sealing, CIP system, explosion-proof



Download the File

Features and specifications: 

1) Suitable for separating suspensions with solid grains larger than 0.01mm

2) Widely used in chemical, pharmaceutical, food, light industry and other trades

3) Most commonly used for gypsum, ferric sulfate, nickel sulphate, copper sulphate,

    potassium chloride, acetate, borax, soda, rubber additives, dye, plastic raw

    material, soap, grease, resin, salt, gourmet powder, food additives, vitamins,

    herbicides, insecticides and dewatering of copper, zinc, aluminum and other 

    mineral powders



Working principles: 

1) SG/SGZ/LGZ series centrifugal machine is a kind of filtering equipment adopting

    scraper bottom-unloading and interval operation

2) The material enters the rotary drum from the upper

3) Under the function of centrifugal force, the liquid passes through the filtering

    medium and discharges out of the machine and the solid is left in the rotary

    drum

4) When the rotary speed reduces, the scraper scrapes the solid material and the

    material is discharged from the bottom of the machine

5) Advantages: steady operation, convenient operation

6) Can set operation program according to demands, auto finishes feeding material,

    separating, dewatering, unloading and other processes

7) Can carry out long-distance operation

8) High automation level, large handing capacity and good separation result

9) LGZ series centrifuge cancels transitional hanging feet, plate counter-weight

    and high viscosity depressor vibration isolator for absorbing shaking

10) No base installation



Download the File

Features:

1) No-base installation, omits traditional tripod type hanging structure and 

    simplifies the installation process

2) Reasonable design and new and simple structure 

3) Basic platform is the work operation platform

4) Uses hanging bag unloading 

5) Reduced labor and high efficiency

6) Simple operations and easy cleaning

7) Outside and inside surface of rotary drum is polished

8) All of fasteners are made of stainless steel

9) Transmission section is sealed with stainless steel 

10) Airtight packing is made of silicone rubber

11) The whole machine meets GMP hygienic standards

12) Imported high-viscosity liquid damping agent shock isolator ensures that no 

    vibrations will affect the base of the unit, the ground and neighboring 

    equipment

13) Outer case has a fully opening cover

14) On the cover, there is a feeding pipe, washing pipe, wide-angle viewing 

    mirror and explosion lamp

15) With open-cover, overheating, overloading and over-current protection

16) Full sealing, explosion-proof and very clean

17) Equipped with an electric control box



Applications: 

1) Suitable to separate the suspension whose solid grain is larger than 0.01mm, 

    especially filtering poisonous, inflammable material

2) Widely sued in chemical, pharmacy, food, light industry and other trades (For

    instance: gypsum, ferric sulfate, nickel sulphate, cooper sulphate, potassium

    chloride, acetate, borax, soda, rubber addition, dye, plastic raw material, soap,

    grease, all kinds of resin, salt, gourmet powder, food addition, vitamin, 

    herbicide, insectifuge and dewatering of cupper, zinc, aluminum and other 

    miner powder)



Download the File

Features and specifications: 

1) Suitable for separating suspensions with solid grains larger than 0.01mm

2) Especially suitable for filtering poisonous and inflammable materials

3) Widely used in chemical, pharmaceutical, food, light industry and other trades

4) Most commonly used for gypsum, ferric sulfate, nickel sulphate, copper sulphate, 

    potassium chloride, acetate, borax, soda, rubber additives, dye, plastic raw 

    material, soap, grease, resin, salt, gourmet powder, food additives, vitamins, 

    herbicides, insecticides and dewatering of copper, zinc, aluminum and other mineral 

    powders



Working principles: 

1) Airtight equipment

2) Programmed operation, interval operation and hanged bag unloading at alien land

3) The material is fed from the upper into the rotary drum

4) Under the centrifugal force function, the liquid passes through the filtering medium 

    and discharges out of the machine

5) The solid is left in the rotary drum

6) After the machine is stopped, the filtering bag and liquid-block plate are hanged out 

    and carried to the fixed site to unload the material

7) Advantages: large capacity, high efficiency, simple operation, fast unloading, good 

    guarding function, clean surrounding, low labor strength



Download the File

Features and specifications:

1) Suitable to separate the suspension whose solid grain (solid state, crystal 

    state or fiber state) is larger than 0.01mm 

2) Also used in dewatering, such as yam or textile

3) Widely used in chemical, pharmacy, food, light industry and other trades (for

    instance: gypsum, ferric sulfate, nickel sulfate, potassium chloride, acetate,

    borax, soda, rubber addition, dye, plastics raw material, soap, grease, all kinds 

    of resin, salt, gourmet powder, food addition, vitamin, herbicide, insectifuge 

    and dewatering of cupper, zinc, aluminum and other miner powder)



Working principles: 

1) Upper unloading and interval operation

2) The material is fed from the upper and enters the rotary drum

3) Under the function of centrifugal force, the liquid passes through the filtering

    medium and discharges out of the machine. The solid is left in the rotary 

    drum

4) After the machine stops, the material is taken out by man.

5) Simple structure, convenient operation, wide applications

6) With counterweight stand and reducer, without base



Download the File

Features:

1) Suitable for suspension liquid of rigid grains or fiber whose bulk 

    concentration of solid and liquid-phase is 10-60% and equivalent diameter of 

    solid grains is ≥80μm that can be normally separated or de-watered 

    centrifugally

2) Can lower the heat and drying cost consumedly, and even omit the drying 

    processing 

3) Continuous feeding and continuous unloading

4) With washing function

5) Suitable for materials which require washing and de-watering

6) All processes can be finished at once

7) Large handling volume

8) Low power consumption

9) Compact structure

10) Easy installation and maintenance



Download the File

Features and specifications:

1) No-base installation, omits traditional tripod type hanging structure and simplifies

    the installation process

2) Reasonable design and new and simple structure 

3) Basic platform is the work operation platform

4) Uses hanging bag unloading 

5) Reduced labor and high efficiency

6) Simple operations and easy cleaning

7) Outside and inside surface of rotary drum is polished

8) All of fasteners are made of stainless steel

9) Transmission section is sealed with stainless steel 

10) Airtight packing is made of silicone rubber

11) Equipped with CIP system, the whole machine meets GMP hygienic standards

12) Imported high-viscosity liquid damping agent shock isolator ensures that no 

    vibrations will affect the base of the unit, the ground and neighboring equipment

13) Outer case has a fully opening cover

14) Especially suitable for solid-liquid separation of poisonous, harmful mediums

15) With open-cover, overheating, overloading and over-current protection

16) Full sealing, explosion-proof and very clean

17) Adopts explosion motor frequency driving and static-proof V-belt

18) When equipped with nitrogen protection, the machine is suitable for solid-liquid

   separation of combustibles or explosive materials



Download the File

Features:

1) Suitable for separating suspensions with solid grains larger than 0.005mm 

    and whose thickness scale is within 2 - 40%

2) Widely used in chemical, light industry, pharmaceutical, food, environment 

    protection and other trades

3) Most commonly used for butanedicarboxylic acid, alum, aluminum hydroxide, 

    ammonium hydrogencarbonate, ammonium chloride, ammonium nitrate, 

    ammonium sulphate, anthracene, antibiotics, barium chloride, barium 

    carbonate, barium sulphate, benzene, blood products, blue vitriol, borax, 

    boric acid, calcium carbonate, calcium citrate, calcium hydroxide, calcium 

    nitrate, calcium oxalate, casen, cellulose, chrome yellow, clay, methyl 

    cellulose, corundum, corn plummule, cooking oil, processed fish, mirabilite, 

    glutamate, hops, pesticide diatomaceous earth, herbicides, tartaric acid, 

    sodium sulphate, sodium phosphate, sodium nitrate, carbon black and 

    others materials



Working principles:

1) Horizontal screw unloading and continuous operation

2) The rotary drum and the screw rotate at different high speeds

3) The materials are pushed into the cylinder by conveying screw through the 

    feeding pipe and into the rotary drum when speeding up

4) Under centrifugal force, the solids form the dregs layer on the wall of rotary

    drum and are pushed to the cone-shaped end of the rotary drum by 

    conveying screw, discharged out of the machine

5) The liquid forms the inside layer liquid circle and flows out from the big end

    of the rotary drum



Download the File