Features:

1) Model JC-IIIC-2105:

    a) Product size: 2,000 x 1,000 x 500mm

    b) Power: 5.5kW	

    c) Compressed air: 0.75	

    d) Steam: 5.5

    e) Hydraulic electric motor power: 0.5kW

    f) Air-blower: DN 50

    g) Leading air machine: 12.0

    h) Pressure tubing: 0.6

    i) Consumption: 8.0

2) Model JC-IIIC-2106:

    a) Product size: 2,000 x 1,000 x 600mm

    b) Power: 5.5kW	

    c) Compressed air: 0.75	

    d) Steam: 5.5

    e) Hydraulic electric motor power: 0.5kW

    f) Air-blower: DN 50

    g) Leading air machine: 12.5

    h) Pressure tubing: 0.6

    i) Consumption: 10.0

3) Model JC-IIIC-2125:

    a) Product size: 2,000 x 1,000 x 500mm

    b) Power: 5.5kW	

    c) Compressed air: 0.75	

    d) Steam: 5.5

    e) Hydraulic electric motor power: 0.5kW

    f) Air-blower: DN 50

    g) Leading air machine: 145.0

    h) Pressure tubing: 0.6

    i) Consumption: 10.0

4) Model JC-IIIC-2126:

    a) Product size: 2,000 x 1,000 x 600mm

    b) Power: 5.5kW	

    c) Compressed air: 0.75	

    d) Steam: 5.5

    e) Hydraulic electric motor power: 0.5kW

    f) Air-blower: DN 50

    g) Leading air machine: 12.0

    h) Pressure tubing: 0.6

    i) Consumption: 11.5

5) Model JC-IIIC-3105:

    a) Product size: 3,000 x 1,000 x 500mm

    b) Power: 5.5kW

    c) Compressed air: 0.75	

    d) Steam: 5.5

    e) Hydraulic electric motor power: 0.5kW

    f) Air-blower: DN 50

    g) Leading air machine: 17.0

    h) Pressure tubing: 0.6

    i) Consumption: 13.5. 

6) Model JC-IIIC-3106:

    a) Product size: 3,000 x 1,000 x 600mm

    b) Power: 5.5kW	

    c) Compressed air: 0.75	

    d) Steam: 5.5

    e) Hydraulic electric motor power: 0.5kW

    f) Air-blower: DN 50

    g) Leading air machine: 17.5

    h) Pressure tubing: 0.6

    i) Consumption: 16.5. 

7) Model JC-IIIC-3125:

    a) Product size: 3,000 x 1,200 x 500mm

    b) Power: 5.5kW	

    c) Compressed air: 0.75	

    d) Steam: 5.5

    e) Hydraulic electric motor power: 0.5kW

    f) Air-blower: DN 50

    g) Leading air machine: 21.5

    h) Pressure tubing: 0.6

    i) Consumption: 16.5. 

8) Model JC-IIIC-3126:

    a) Product size: 3,000 x 1,200 x 600mm

    b) Power: 5.5kW	

    c) Compressed air: 0.75	

    d) Steam: 5.5

    e) Hydraulic electric motor power: 0.5kW

    f) Air-blower: DN 50

    g) Leading air machine: 23

    h) Pressure tubing: 0.6

    i) Consumption: 21

9) Model JC-IIIC-4125:

    a) Product size: 4,000 x 1,200 x 500mm

    b) Power: 5.5kW	

    c) Compressed air: 0.75	

    d) Steam: 5.5

    e) Hydraulic electric motor power: 0.5kW

    f) Air-blower: DN 50

    g) Leading air machine: 30

    h) Pressure tubing: 0.6

    i) Consumption: 24

10) Model JC-IIIC-4126:

     a) Product size: 4,000 x 1,200 x 600mm

     b) Power: 5.5kW	

     c) Compressed air: 0.75	

     d) Steam: 5.5

     e) Hydraulic electric motor power: 0.5kW

     f) Air-blower: DN 50

     g) Leading air machine: 33.5

     h) Pressure tubing: 0.6

     i) Consumption: 28

11) Model JC-IIIC-6125:	

     a) Product size: 6,000 x 1,200 x 500mm

     b) Power: 5.5kW	

     c) Compressed air: 0.75	

     d) Steam: 5.5

     e) Hydraulic electric motor power: 0.5kW

     f) Air-blower: DN 50

     g) Leading air machine: 40.0

     h) Pressure tubing: 0.6

     i) Consumption: 32

12) Model JC-IIIC-6126:	

     a) Product size: 6,000 x 1,200 x 600mm

     b) Power: 5.5kW	

     c) Compressed air: 0.75	

     d) Steam: 5.5

     e) Hydraulic electric motor power: 0.5kW

     f) Air-blower: DN 50

     g) Leading air machine: 42.0

     h) Pressure tubing: 0.6

     i) Consumption: 37

Features:

1) The EPS beads going through the expander, fluidized bed (chosen), fan, 

    transportation, etc. procedures to finish the EPS beads expended

2) In the system, two inputting senders included for sending EPS beads, the 

    first doing by changeable speeds of machine, the second by moving rails and 

    fans of lowering temperature, which for sending in stability

3) The auto-sender by laser to control the quantity of sent EPS beads. By which 

    the sender is auto-working

4) Inside the pipe, embraced around outside by stainless steel, it's beautiful 

    and durable

5) Shaking rack rail machine can adjust the height of the output door, adjust 

    the contain of the output materials, to satisfy the demand of the prepare store 

    issue of different products

6) Among them, two times foam machine can be used to proceed a time or twice 

    foam making respectively, and the contain of the " EPS" achieves the ideal 

    condition of the products

Features:
1) This automatic batch pre-expander has a PLC and touch panel with a full automatic

    production cycle controlling filling electronic weighing, chamber temperature,pressure

    and level testing
2) It uses an electronic weighing system and level sensor to control raw material

    volumes and expanded density, while ensuring density tolerances within 3%
3) With the adoptions of  the German comparison valve (installed additionally according

    to the customer's demand and Japanese high accuracies of the decompression
    valve control the temperature and the steam pressure in the chamber, which can
 

    guarantee the stability of the pressure in the decompression valve export, thus
the

    chamber temperature is controlled to within ±1%, also guarantee the  

    consistency of the emanative raw material of EPS, and prevent if from  
    agglomeration because of bad control of the temperature
4) Adoptions of the automatically pressure relief and stress facility, and electronic

    weighing facility, combining to the material control which achieves the task
of

    self-filling, thus offers high efficiency and low labor consumption
5) Closed chamber keeps permanent pressure, and efficient heating helps save up to

    50% steam compare to continuous pre-expanders
6) With a closed efficient drying system in the expansion chamber, material can be

    dried in the chamber rather than having to use a long fluidized bed
7) The machine has a fully automatic production cycle which controls filling, expanding

    drying, sieving, de-lumping and transportation to silo
8) Electric appliances, power components, the valves etc are all local well-know
  

    brands, thus guarantee the machine operation stability, credibity and long service
 

    life
9) Filling is done by a backpressure conveyor,which increase the filling speed
10) The computer has a memory function. The usually used EPS material producers's
 

    brand names, the size expanding technology, and the producing parameters etc
all 

    can be stored in it. When you need to use the raw material used before, all what
 

    you have to the originally stored producting model
11) Because the electronics are put on the chamber, also the drying pros is done
in

    the chamber body. It has a compact structure which occupies a smaller area
12) Even suitable for suing in a plateau area,with represents the great superior
of

    batch pre-expander (under the same condition the continuous pre-expander have

    a much lower efficiency

Feature:

1) This automatic batch pre-expander has a PLC and touch panel with a full 

    automatic production cycle controlling filling electronic weighing, chamber  

    temperature, pressure and level testing

2) It uses an electronic weighing system and level sensor to control raw material

    volumes and expanded density, while ensuring density tolerances within 3%

3) With the adoptions of  the German comparison valve (installed additionally 

    according to the customer's demand and Japanese high accuracies of the  

    decompression valve control the temperature and the steam pressure in the 

    chamber, which can guarantee the stability of the pressure in the decompression   

    valve export, thus the chamber temperature is controlled to within +/-1%, also  

    guarantee the consistency of the emanative raw material of EPS, and prevent it  

    from agglomeration because of bad control of the temperature

4) Adoptions of the automatically pressure relief and stress facility, and electronic

    weighing facility, combining to the material control which achieves the task of

    self-filling, thus offers high efficiency and low labor consumption

5) Closed chamber keeps permanent pressure,and efficient heating helps save 

    up to 50% steam compare to continuous pre-expanders

6) With a closed efficient drying system in the expansion chamber, material can be

    dried in the chamber rather than having to use a long fluidized bed

7) The machine has a fully automatic production cycle which controls filling,

    expanding drying, sieving, de-lumping and transportation to silo

8) Electric appliances,power components,the valves etc are all local well-know   

    brands, thus guarantee the machine operation stability ,credibity and long 

    service life

9) Filling is done by a backpressure conveyor,which increase the filling speed

10) The computer has a memory function.The usually used EPS material producers's

      brand names,the size expanding technology, and the producing parameters etc.  

      all can be stored in it.when you need to use the raw material used before,

      all what you have to the originally stored producting model

11) Because the electronics are put on the chamber,also the drying pros is done in

      the chamber body. It has a compact structure which occupies a smaller area

12) Even suitable for suing in a plateau area,with represents the great superior of

      batch pre-expander (under the same condition the continuous pre-expander 

      have a much lower efficiency