TGM2-63(C60) mini circuit breakers belong to the advanced level of the 90s in the international market instead of the generation of TGM47-63. They also have many merits of high protective grade (up to IP 20), high breaking capacity, good reliability of sensitive action, convenient multi-pole assorting, and long life.  



They are mainly used for overload and short circuit protection within the circuit of AC 50Hz, 230V in single pole, 400V in double, three and four poles of lighting distribution system in industry and commerce. Meanwhile, they are also used in turning on or off the electric apparatus and lighting circuit under the normal condition.

The residual current device (RCD) is in conformity with the standard of IEC1008, VDE0664, CEE27 and BS 4293. It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line. Thus it is suitable to avoid the shock hazard and fire caused by earth leakage. 



It is mainly used in varieties of plants, enterprises, buildings, construction, commerce, hotels and families. It can be used in the circuit of up to single phase 240V, three phase 415V, and 50 / 60Hz.

TGW17 series low voltage universal circuit breakers are suitable for the distribution circuit of AC 50Hz, voltage 380V and 660V, and current up to 5,000A, used as distributing electric equipment against the overload, voltage drop and short circuit. 



It also can be used as infrequent changeover of circuit under the normal condition. The circuit breaker less than 1,250A can be used as protective motor against overload or short circuit in circuit of AC 50Hz and voltage 380V, as well as used as unfrequented starting motor under the normal condition.

Features: 

1) Suitable for industrial or commercial power and lighting circuit

2) Rated voltage is 240V - 415V (AC 50Hz)

3) Can be used to protect the circuit that overload or short circuit may occur

Features: 

1) Tripping off protection

2) Overload protection

3) Control

4) Isolation 

5) Between TN and IT systems as indirect contact protection

6) Suitable for terminal distribution and industrial apparatus

TGW45 series universal current breakers are used in the current of AC 50Hz, and rated voltage up to 380V / 660V. The distribution electric net is used to prevent circuit and equipment from damage as overload, over-voltage, short circuit, and single-phase.

TGM47-63 series circuit breakers are used in the lighting distribution system or motor distribution system for protecting overload and short-circuit in the system. The product is neoteric in structure, light in weight, reliable and excellent in performance. 



Its frame and parts adopt plastics of high fire-resistant and shockproof performance. The product, with long life, is mainly used in the circuit of AC 50Hz / 60Hz single-pole 240V or two, three, four-pole 415V for overload and short-circuit protection as well as for infrequent on-and-off switching electric equipment and lighting circuit under the normal condition. The products comply with IEC 898 and BS 3871.