Main technical parameters:

1) Working voltage: AC 220V 110V 24V 50Hz; DC 24V; permit voltage fluctuating 

    range: 85 - 110%

2) Counting range: 1 - 99999 times

3) Input mode of counting signal:

    a) Contact signal input counting

    b) Electric level input counting (5-30V)

    c) Sensor signal input counting 

4) Counting speed:

    a) Low frequency counting: 30times/sec (counter pulse≥15ms)

    b) High frequency counting: 500times/sec counter pulse (signal space rate 1:1)

5) Power out memory: holding mode terminal 11.10 short connection; 10 years 

    memory holding: non-holding mode; 11.10 without short connection 

6) Counting mode:

    a) General counting: additive counting

    b) Reversible counting: additive or backward counting 

7) Restoration mode:

    a) External terminal reset

    b) Press-button restoration

Main technical parameters:

1) Power supply: inner power supply

2) Battery endurance: about 10 years (25°C)

3 ) Counting range: 0 - 999999 8:0-99999999

4) Min. counting speed: CDEC1-L 50ms (10 times/s); CDEC1-H 2.5ms (times/s)

5) Reset mode: panel button reset (six-position); external terminal reset

6) Ambient temperature for service: -5 ~ +40°C  (the state of no freeze)

7) No voltage input:

    a) Max. resistance for contact make: ≤10kΩ (counting ON)

    b) Min. resistance for contact break: ≤500kΩ (counting OFF)

    c) Max. input residual voltage: 0.5V

8) Voltage input: 

    a) L: DC 0 - 2V 

    b) H: DC 4 - 30V (H is active) (put impedance: ≥4.7kΩ)

9) Min. reset pulse width: ≥0.2s

10) Weight: about 60g

11) Holing size: 22.5 x 45mm

Specifications:

1) Power supply voltage: 85 - 110% 

2) Rated voltage: 36V, 110V, 127V, 220V, 380V 50/60Hz, DC 24V

3) Counting range: 1 - 9999 (x1x10x100) multiple dial switch setting

4) Power consumption: ≤3W